Sealed
More data neededFs, Qts and Vas are needed for the basic box model. Missing values are not estimated here.
Fs Not recorded · Qts 0.3 · Vas 71 LNO PHOTONo photo available
Ahuja
Ahuja L12-MB300
Woofer · 12″ · 8 Ω
Ahuja L12-MB300: Woofer. Published Fs Not recorded, Qts 0.3 , Vas 71 L. Explore these values before choosing an enclosure.
- Resonance Fs
- —
- Nominal sensitivity
- 99 dB
- Rated power
- 300 W
- Excursion Xmax
- —
What this driver's data tells us
Ahuja L12-MB300
Ahuja L12-MB300 is a Woofer. Its available data describe the following design trade-offs.
The database lacks Fs. A dependable enclosure-size and bass-extension assessment needs those values; none have been guessed.
Qts 0.3 makes a vented alignment worth simulating. Choose volume and tuning together and check excursion; Qts alone cannot guarantee a good result.
Published sensitivity is 99 dB (1 W / 1 m). Sensitivity describes output for the stated input, not maximum usable sound pressure.
On an approximate 1 W / 1 m basis (99 dB), sensitivity is relatively high, giving more rated-band output for the same input power.
Basis and further reading
Calculated from published parameters; this is not a listening review. Box sizes are net acoustic volume for one driver. Room gain, EQ, damping material and construction losses are excluded.
Voltage-to-power conversion uses nominal impedance. These size, cutoff and sensitivity bands are editorial guides, not audio-quality standards.
Driver character card
Explore the stats
These bars show physical quantities, not sound-quality scores. A longer bar is not always better. Open a stat to learn what it means.
Resonance · FsNot recordedDisplay range: 10–2,000 Hz · log
The driver's free-air resonance. A lower value can help a bass design, but the enclosure, excursion and response determine usable bass. It is not the finished speaker's bass cutoff.
Sensitivity99 dBDisplay range: 65–115 dB
Output at the manufacturer's stated input and distance. 1 W and 2.83 V are different references for many impedances. This card keeps the original value and reference; it is not an efficiency or sound-quality rating.
Resonance damping · Qts0.3 Display range: 0–1.5
Electrical and mechanical damping combined. Lower values indicate stronger damping at resonance. It helps choose an enclosure alignment, but does not tell you whether the sound is fast, warm or detailed.
Suspension compliance · Vas71 LDisplay range: 0.1–1,000 L · log
The volume of air with the same compliance as the suspension. It is not a recommended box volume. Use it together with Fs and Qts.
Linear excursion · XmaxNot recordedDisplay range: 0–30 mm
Published linear excursion. Definitions differ between manufacturers; verify one-way versus peak-to-peak values. It does not by itself predict distortion or maximum safe output.
Radiating area · SdNot recordedDisplay range: 1–1,500 cm² · log
Effective radiating area, not the frame's outside diameter. It helps estimate how much air a cone moves when combined with excursion.
Sensitivity reference: 1W/1m
Which enclosure could work?
Screening guidance from the available parameters, not a guarantee. A manufacturer's exact-model enclosure plan takes priority. Listening quality cannot be ranked from T/S parameters.
Bass reflex
More data neededFs, Qts and Vas are needed for the basic box model. Missing values are not estimated here.
Fs Not recorded · Qts 0.3 · Vas 71 LTransmission line / quarter-wave
More data neededFs, Qts and Vas are needed for the basic box model. Missing values are not estimated here.
Fs Not recorded · Qts 0.3Back-loaded horn
Needs careful designUse an exact-model manufacturer plan or a dedicated horn model. Qts alone cannot establish suitability. Throat, mouth, path and rear chamber must be designed together; this page does not simulate horns.
Fs Not recorded · Qts 0.3Explore other enclosure types
Mass-loaded transmission line
More data neededFs, Qts and Vas are needed for the basic box model. Missing values are not estimated here.
Fs Not recorded · Qts 0.3Passive radiator system
More data neededFs, Qts and Vas are needed for the basic box model. Missing values are not estimated here.
Fs Not recorded · Qts 0.3Double bass reflex
More data neededFs, Qts and Vas are needed for the basic box model. Missing values are not estimated here.
Fs Not recorded · Qts 0.3Open baffle
More data neededFs, Qts and Vas are needed for the basic box model. Missing values are not estimated here.
Fs Not recorded · Qts 0.3Basis and further reading
Bass mini-lab
Move the volume slider. Both curves use the same box volume; the bass-reflex tuning is adjustable.
The mini-lab needs valid Fs, Qts and Vas for a bass driver. It stays unavailable when those inputs are missing or the driver has another role.
Frequency response Response
Common scale for all drivers: 20–20,000 HzNo usable response data is recorded
Unavailable response data is not guessed or plotted.
What do published reviews say?
Attributed summaries, not our listening test or a consensus score. The enclosure, crossover, room and listening level affect each review. Exact model and impedance are checked.
No exact-model listening review has been verified for this page yet. We do not infer tonal quality from T/S parameters or borrow reviews of similar model names.
Compare prices
Compare in USD, EUR or JPY. Prices exclude shipping.