JSB SPEAKER STUDIO
Dayton Audio TD24F-4NO PHOTONo photo available

Dayton Audio

Dayton Audio TD24F-4

Tweeter · 1″ · 4 Ω

Dayton Audio TD24F-4: Tweeter. Published Fs 1,667 Hz, Qts Not recorded, Vas Not recorded. Explore these values before choosing an enclosure.

Resonance Fs
1,667 Hz
Nominal sensitivity
90 dB
Rated power
25 W
Excursion Xmax
—
Design with this driver Manufacturer / original source ↗

What this driver's data tells us

Dayton Audio TD24F-4

Dayton Audio TD24F-4 is a Tweeter. Its available data describe the following design trade-offs.

This is a high-frequency driver. Sealed/vented bass-box suitability is not a useful rating; check its usable response band and the manufacturer's crossover guidance. Fs alone is not a safe crossover frequency.

Published sensitivity is 90 dB (2.83 V / 1 m). Sensitivity describes output for the stated input, not maximum usable sound pressure.

On an approximate 1 W / 1 m basis (87 dB), sensitivity is in a moderate range.

Basis and further reading

Calculated from published parameters; this is not a listening review. Box sizes are net acoustic volume for one driver. Room gain, EQ, damping material and construction losses are excluded.

Voltage-to-power conversion uses nominal impedance. These size, cutoff and sensitivity bands are editorial guides, not audio-quality standards.

Driver character card

Explore the stats

These bars show physical quantities, not sound-quality scores. A longer bar is not always better. Open a stat to learn what it means.

Resonance · Fs1,667 HzDisplay range: 10–2,000 Hz · log

The driver's free-air resonance. A lower value can help a bass design, but the enclosure, excursion and response determine usable bass. It is not the finished speaker's bass cutoff.

Sensitivity90 dBDisplay range: 65–115 dB

Output at the manufacturer's stated input and distance. 1 W and 2.83 V are different references for many impedances. This card keeps the original value and reference; it is not an efficiency or sound-quality rating.

Resonance damping · QtsNot recordedDisplay range: 0–1.5

Electrical and mechanical damping combined. Lower values indicate stronger damping at resonance. It helps choose an enclosure alignment, but does not tell you whether the sound is fast, warm or detailed.

Suspension compliance · VasNot recordedDisplay range: 0.1–1,000 L · log

The volume of air with the same compliance as the suspension. It is not a recommended box volume. Use it together with Fs and Qts.

Linear excursion · XmaxNot recordedDisplay range: 0–30 mm

Published linear excursion. Definitions differ between manufacturers; verify one-way versus peak-to-peak values. It does not by itself predict distortion or maximum safe output.

Radiating area · SdNot recordedDisplay range: 1–1,500 cm² · log

Effective radiating area, not the frame's outside diameter. It helps estimate how much air a cone moves when combined with excursion.

Sensitivity reference: 2.83V/1m

Which enclosure could work?

Screening guidance from the available parameters, not a guarantee. A manufacturer's exact-model enclosure plan takes priority. Listening quality cannot be ranked from T/S parameters.

A tweeter is not selected by bass-enclosure alignment. Follow the maker's rear-chamber requirements and choose a safe crossover.
Basis and further reading

Bass mini-lab

Move the volume slider. Both curves use the same box volume; the bass-reflex tuning is adjustable.

The mini-lab needs valid Fs, Qts and Vas for a bass driver. It stays unavailable when those inputs are missing or the driver has another role.

Frequency response Response

Common scale for all drivers: 20–20,000 Hz
Dayton Audio TD24F-420 Hz — 20 kHz · Logarithmic axis
455055606570758085909520501002005001k2k5k10k20kdB SPLHz
Source SPL curveRecorded range: 100〜40,000 HzUnavailable or missing ranges are left blank.
Automatically validated response data2.83V/1mResponse source ↗

What do published reviews say?

Attributed summaries, not our listening test or a consensus score. The enclosure, crossover, room and listening level affect each review. Exact model and impedance are checked.

No exact-model listening review has been verified for this page yet. We do not infer tonal quality from T/S parameters or borrow reviews of similar model names.

Compare prices

Compare in USD, EUR or JPY. Prices exclude shipping.

More from this manufacturer

Dayton Audio — view all →